Grain It Technologies Offers Multiple Woodgraining Services.

Standard Prep. Service
Parts will be bead blasted to bare metal. Primed with 2k Primer.
Minor pitting filled, and small dings removed. Basecoat Applied.
   Factory Original Woodgraining Applied.Original Toning process applied.
Then a final clear coat in your choice of option 1: 2K Urethane
 or option 2: Lacquer (see below)
Finally a sanding and buffing once parts are completely dried.

 Call for current package deals or current discounts.
863-299-4494


1.  Modern 2k Urethane Cleared Woodgraining.
Standard Prep Service, basecoat and woodgraining.

Your parts will receive 3 Coats of 2K Clear.

       Then Sanded smooth and an additional 2 Coats Of Glamour Clear Applied.
    Finally your parts will be sanded and buffed again.
This Service Provides The Highest Gloss And The Most Durable Finish.

Average Prices. Dash Boards $1,000 - $1,200
Garnish Moldings $250 ea.


2. Lacquer Cleared Woodgraining. 
  
Standard Prep Service, basecoat and woodgraining.
Your parts will receive 3 Coats of Lacquer Clear. Then sanded smooth and an additional 3 Coats of Lacquer Clear applied. 
Then your parts will be sanded and buffed again.
This Service Provides A More Original Looking Finish.
without the high Surface reflection of the 2k Urethane.
The cost for this service is slightly less.

    
  Average Prices. Dash Boards $800 - $1,000
 Garnish Moldings $200 ea.
 


3. Woodgraining Only.  
 You do your own Prep, bodywork and priming.
We do the Basecoat, Woodgraining, Toning, and Lockdown coat.
You do the final Clear Coat and buff. 
Average Prices. Dash Boards $500 - $600
  Garnish Moldings $125 ea.
 

Note: Extreme Rust and Holes will add extra cost. 
    If you can repair before sending parts, this will save you even more on your restoration.